/*
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
package org.apache.hadoop.hbase.client;

import java.io.IOException;
import java.util.ArrayList;
import java.util.HashMap;
import java.util.List;
import java.util.Map;
import java.util.NavigableSet;
import java.util.TreeMap;
import java.util.TreeSet;
import java.util.stream.Collectors;
import org.apache.hadoop.hbase.HConstants;
import org.apache.hadoop.hbase.client.metrics.ScanMetrics;
import org.apache.hadoop.hbase.filter.Filter;
import org.apache.hadoop.hbase.filter.IncompatibleFilterException;
import org.apache.hadoop.hbase.io.TimeRange;
import org.apache.hadoop.hbase.security.access.Permission;
import org.apache.hadoop.hbase.security.visibility.Authorizations;
import org.apache.hadoop.hbase.util.Bytes;
import org.apache.yetus.audience.InterfaceAudience;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;

import org.apache.hadoop.hbase.shaded.protobuf.ProtobufUtil;

/**
 * Used to perform Scan operations.
 * <p>
 * All operations are identical to {@link Get} with the exception of instantiation. Rather than
 * specifying a single row, an optional startRow and stopRow may be defined. If rows are not
 * specified, the Scanner will iterate over all rows.
 * <p>
 * To get all columns from all rows of a Table, create an instance with no constraints; use the
 * {@link #Scan()} constructor. To constrain the scan to specific column families, call
 * {@link #addFamily(byte[]) addFamily} for each family to retrieve on your Scan instance.
 * <p>
 * To get specific columns, call {@link #addColumn(byte[], byte[]) addColumn} for each column to
 * retrieve.
 * <p>
 * To only retrieve columns within a specific range of version timestamps, call
 * {@link #setTimeRange(long, long) setTimeRange}.
 * <p>
 * To only retrieve columns with a specific timestamp, call {@link #setTimestamp(long) setTimestamp}
 * .
 * <p>
 * To limit the number of versions of each column to be returned, call {@link #setMaxVersions(int)
 * setMaxVersions}.
 * <p>
 * To limit the maximum number of values returned for each call to next(), call
 * {@link #setBatch(int) setBatch}.
 * <p>
 * To add a filter, call {@link #setFilter(org.apache.hadoop.hbase.filter.Filter) setFilter}.
 * <p>
 * For small scan, it is deprecated in 2.0.0. Now we have a {@link #setLimit(int)} method in Scan
 * object which is used to tell RS how many rows we want. If the rows return reaches the limit, the
 * RS will close the RegionScanner automatically. And we will also fetch data when openScanner in
 * the new implementation, this means we can also finish a scan operation in one rpc call. And we
 * have also introduced a {@link #setReadType(ReadType)} method. You can use this method to tell RS
 * to use pread explicitly.
 * <p>
 * Expert: To explicitly disable server-side block caching for this scan, execute
 * {@link #setCacheBlocks(boolean)}.
 * <p>
 * <em>Note:</em> Usage alters Scan instances. Internally, attributes are updated as the Scan runs
 * and if enabled, metrics accumulate in the Scan instance. Be aware this is the case when you go to
 * clone a Scan instance or if you go to reuse a created Scan instance; safer is create a Scan
 * instance per usage.
 */
@InterfaceAudience.Public
public class Scan extends Query {
  private static final Logger LOG = LoggerFactory.getLogger(Scan.class);

  private static final String RAW_ATTR = "_raw_";

  private byte[] startRow = HConstants.EMPTY_START_ROW;
  private boolean includeStartRow = true;
  private byte[] stopRow = HConstants.EMPTY_END_ROW;
  private boolean includeStopRow = false;
  private int maxVersions = 1;
  private int batch = -1;

  /**
   * Partial {@link Result}s are {@link Result}s must be combined to form a complete {@link Result}.
   * The {@link Result}s had to be returned in fragments (i.e. as partials) because the size of the
   * cells in the row exceeded max result size on the server. Typically partial results will be
   * combined client side into complete results before being delivered to the caller. However, if
   * this flag is set, the caller is indicating that they do not mind seeing partial results (i.e.
   * they understand that the results returned from the Scanner may only represent part of a
   * particular row). In such a case, any attempt to combine the partials into a complete result on
   * the client side will be skipped, and the caller will be able to see the exact results returned
   * from the server.
   */
  private boolean allowPartialResults = false;

  private int storeLimit = -1;
  private int storeOffset = 0;

  /**
   * @deprecated since 1.0.0. Use {@link #setScanMetricsEnabled(boolean)}
   */
  // Make private or remove.
  @Deprecated
  static public final String SCAN_ATTRIBUTES_METRICS_ENABLE = "scan.attributes.metrics.enable";

  /**
   * Use {@link #getScanMetrics()}
   */
  // Make this private or remove.
  @Deprecated
  static public final String SCAN_ATTRIBUTES_METRICS_DATA = "scan.attributes.metrics.data";

  // If an application wants to use multiple scans over different tables each scan must
  // define this attribute with the appropriate table name by calling
  // scan.setAttribute(Scan.SCAN_ATTRIBUTES_TABLE_NAME, Bytes.toBytes(tableName))
  static public final String SCAN_ATTRIBUTES_TABLE_NAME = "scan.attributes.table.name";
  static private final String SCAN_ATTRIBUTES_METRICS_BY_REGION_ENABLE =
    "scan.attributes.metrics.byregion.enable";

  /**
   * -1 means no caching specified and the value of {@link HConstants#HBASE_CLIENT_SCANNER_CACHING}
   * (default to {@link HConstants#DEFAULT_HBASE_CLIENT_SCANNER_CACHING}) will be used
   */
  private int caching = -1;
  private long maxResultSize = -1;
  private boolean cacheBlocks = true;
  private boolean reversed = false;
  private TimeRange tr = TimeRange.allTime();
  private Map<byte[], NavigableSet<byte[]>> familyMap =
    new TreeMap<byte[], NavigableSet<byte[]>>(Bytes.BYTES_COMPARATOR);
  private Boolean asyncPrefetch = null;

  /**
   * Parameter name for client scanner sync/async prefetch toggle. When using async scanner,
   * prefetching data from the server is done at the background. The parameter currently won't have
   * any effect in the case that the user has set Scan#setSmall or Scan#setReversed
   */
  public static final String HBASE_CLIENT_SCANNER_ASYNC_PREFETCH =
    "hbase.client.scanner.async.prefetch";

  /**
   * Default value of {@link #HBASE_CLIENT_SCANNER_ASYNC_PREFETCH}.
   */
  public static final boolean DEFAULT_HBASE_CLIENT_SCANNER_ASYNC_PREFETCH = false;

  /**
   * Set it true for small scan to get better performance Small scan should use pread and big scan
   * can use seek + read seek + read is fast but can cause two problem (1) resource contention (2)
   * cause too much network io [89-fb] Using pread for non-compaction read request
   * https://issues.apache.org/jira/browse/HBASE-7266 On the other hand, if setting it true, we
   * would do openScanner,next,closeScanner in one RPC call. It means the better performance for
   * small scan. [HBASE-9488]. Generally, if the scan range is within one data block(64KB), it could
   * be considered as a small scan.
   */
  private boolean small = false;

  /**
   * The mvcc read point to use when open a scanner. Remember to clear it after switching regions as
   * the mvcc is only valid within region scope.
   */
  private long mvccReadPoint = -1L;

  /**
   * The number of rows we want for this scan. We will terminate the scan if the number of return
   * rows reaches this value.
   */
  private int limit = -1;

  /**
   * Control whether to use pread at server side.
   */
  private ReadType readType = ReadType.DEFAULT;

  private boolean needCursorResult = false;

  /**
   * Create a Scan operation across all rows.
   */
  public Scan() {
  }

  /**
   * @deprecated since 2.0.0 and will be removed in 3.0.0. Use
   *             {@code new Scan().withStartRow(startRow).setFilter(filter)} instead.
   * @see <a href="https://issues.apache.org/jira/browse/HBASE-17320">HBASE-17320</a>
   */
  @Deprecated
  public Scan(byte[] startRow, Filter filter) {
    this(startRow);
    this.filter = filter;
  }

  /**
   * Create a Scan operation starting at the specified row.
   * <p>
   * If the specified row does not exist, the Scanner will start from the next closest row after the
   * specified row.
   * @param startRow row to start scanner at or after
   * @deprecated since 2.0.0 and will be removed in 3.0.0. Use
   *             {@code new Scan().withStartRow(startRow)} instead.
   * @see <a href="https://issues.apache.org/jira/browse/HBASE-17320">HBASE-17320</a>
   */
  @Deprecated
  public Scan(byte[] startRow) {
    setStartRow(startRow);
  }

  /**
   * Create a Scan operation for the range of rows specified.
   * @param startRow row to start scanner at or after (inclusive)
   * @param stopRow  row to stop scanner before (exclusive)
   * @deprecated since 2.0.0 and will be removed in 3.0.0. Use
   *             {@code new Scan().withStartRow(startRow).withStopRow(stopRow)} instead.
   * @see <a href="https://issues.apache.org/jira/browse/HBASE-17320">HBASE-17320</a>
   */
  @Deprecated
  public Scan(byte[] startRow, byte[] stopRow) {
    setStartRow(startRow);
    setStopRow(stopRow);
  }

  /**
   * Creates a new instance of this class while copying all values.
   * @param scan The scan instance to copy from.
   * @throws IOException When copying the values fails.
   */
  public Scan(Scan scan) throws IOException {
    startRow = scan.getStartRow();
    includeStartRow = scan.includeStartRow();
    stopRow = scan.getStopRow();
    includeStopRow = scan.includeStopRow();
    maxVersions = scan.getMaxVersions();
    batch = scan.getBatch();
    storeLimit = scan.getMaxResultsPerColumnFamily();
    storeOffset = scan.getRowOffsetPerColumnFamily();
    caching = scan.getCaching();
    maxResultSize = scan.getMaxResultSize();
    cacheBlocks = scan.getCacheBlocks();
    filter = scan.getFilter(); // clone?
    loadColumnFamiliesOnDemand = scan.getLoadColumnFamiliesOnDemandValue();
    consistency = scan.getConsistency();
    this.setIsolationLevel(scan.getIsolationLevel());
    reversed = scan.isReversed();
    asyncPrefetch = scan.isAsyncPrefetch();
    small = scan.isSmall();
    allowPartialResults = scan.getAllowPartialResults();
    tr = scan.getTimeRange(); // TimeRange is immutable
    Map<byte[], NavigableSet<byte[]>> fams = scan.getFamilyMap();
    for (Map.Entry<byte[], NavigableSet<byte[]>> entry : fams.entrySet()) {
      byte[] fam = entry.getKey();
      NavigableSet<byte[]> cols = entry.getValue();
      if (cols != null && cols.size() > 0) {
        for (byte[] col : cols) {
          addColumn(fam, col);
        }
      } else {
        addFamily(fam);
      }
    }
    for (Map.Entry<String, byte[]> attr : scan.getAttributesMap().entrySet()) {
      setAttribute(attr.getKey(), attr.getValue());
    }
    for (Map.Entry<byte[], TimeRange> entry : scan.getColumnFamilyTimeRange().entrySet()) {
      TimeRange tr = entry.getValue();
      setColumnFamilyTimeRange(entry.getKey(), tr.getMin(), tr.getMax());
    }
    this.mvccReadPoint = scan.getMvccReadPoint();
    this.limit = scan.getLimit();
    this.needCursorResult = scan.isNeedCursorResult();
    setPriority(scan.getPriority());
    readType = scan.getReadType();
    super.setReplicaId(scan.getReplicaId());
    super.setQueryMetricsEnabled(scan.isQueryMetricsEnabled());
  }

  /**
   * Builds a scan object with the same specs as get.
   * @param get get to model scan after
   */
  public Scan(Get get) {
    this.startRow = get.getRow();
    this.includeStartRow = true;
    this.stopRow = get.getRow();
    this.includeStopRow = true;
    this.filter = get.getFilter();
    this.cacheBlocks = get.getCacheBlocks();
    this.maxVersions = get.getMaxVersions();
    this.storeLimit = get.getMaxResultsPerColumnFamily();
    this.storeOffset = get.getRowOffsetPerColumnFamily();
    this.tr = get.getTimeRange();
    this.familyMap = get.getFamilyMap();
    this.asyncPrefetch = false;
    this.consistency = get.getConsistency();
    this.setIsolationLevel(get.getIsolationLevel());
    this.loadColumnFamiliesOnDemand = get.getLoadColumnFamiliesOnDemandValue();
    for (Map.Entry<String, byte[]> attr : get.getAttributesMap().entrySet()) {
      setAttribute(attr.getKey(), attr.getValue());
    }
    for (Map.Entry<byte[], TimeRange> entry : get.getColumnFamilyTimeRange().entrySet()) {
      TimeRange tr = entry.getValue();
      setColumnFamilyTimeRange(entry.getKey(), tr.getMin(), tr.getMax());
    }
    this.mvccReadPoint = -1L;
    setPriority(get.getPriority());
    super.setReplicaId(get.getReplicaId());
    super.setQueryMetricsEnabled(get.isQueryMetricsEnabled());
  }

  public boolean isGetScan() {
    return includeStartRow && includeStopRow
      && ClientUtil.areScanStartRowAndStopRowEqual(this.startRow, this.stopRow);
  }

  /**
   * Get all columns from the specified family.
   * <p>
   * Overrides previous calls to addColumn for this family.
   * @param family family name
   */
  public Scan addFamily(byte[] family) {
    familyMap.remove(family);
    familyMap.put(family, null);
    return this;
  }

  /**
   * Get the column from the specified family with the specified qualifier.
   * <p>
   * Overrides previous calls to addFamily for this family.
   * @param family    family name
   * @param qualifier column qualifier
   */
  public Scan addColumn(byte[] family, byte[] qualifier) {
    NavigableSet<byte[]> set = familyMap.get(family);
    if (set == null) {
      set = new TreeSet<>(Bytes.BYTES_COMPARATOR);
      familyMap.put(family, set);
    }
    if (qualifier == null) {
      qualifier = HConstants.EMPTY_BYTE_ARRAY;
    }
    set.add(qualifier);
    return this;
  }

  /**
   * Get versions of columns only within the specified timestamp range, [minStamp, maxStamp). Note,
   * default maximum versions to return is 1. If your time range spans more than one version and you
   * want all versions returned, up the number of versions beyond the default.
   * @param minStamp minimum timestamp value, inclusive
   * @param maxStamp maximum timestamp value, exclusive
   * @see #setMaxVersions()
   * @see #setMaxVersions(int)
   */
  public Scan setTimeRange(long minStamp, long maxStamp) throws IOException {
    tr = new TimeRange(minStamp, maxStamp);
    return this;
  }

  /**
   * Get versions of columns with the specified timestamp. Note, default maximum versions to return
   * is 1. If your time range spans more than one version and you want all versions returned, up the
   * number of versions beyond the defaut.
   * @param timestamp version timestamp
   * @see #setMaxVersions()
   * @see #setMaxVersions(int)
   * @deprecated As of release 2.0.0, this will be removed in HBase 3.0.0. Use
   *             {@link #setTimestamp(long)} instead
   */
  @Deprecated
  public Scan setTimeStamp(long timestamp) throws IOException {
    return this.setTimestamp(timestamp);
  }

  /**
   * Get versions of columns with the specified timestamp. Note, default maximum versions to return
   * is 1. If your time range spans more than one version and you want all versions returned, up the
   * number of versions beyond the defaut.
   * @param timestamp version timestamp
   * @see #setMaxVersions()
   * @see #setMaxVersions(int)
   */
  public Scan setTimestamp(long timestamp) {
    try {
      tr = new TimeRange(timestamp, timestamp + 1);
    } catch (Exception e) {
      // This should never happen, unless integer overflow or something extremely wrong...
      LOG.error("TimeRange failed, likely caused by integer overflow. ", e);
      throw e;
    }

    return this;
  }

  @Override
  public Scan setColumnFamilyTimeRange(byte[] cf, long minStamp, long maxStamp) {
    super.setColumnFamilyTimeRange(cf, minStamp, maxStamp);
    return this;
  }

  /**
   * Set the start row of the scan.
   * <p>
   * If the specified row does not exist, the Scanner will start from the next closest row after the
   * specified row.
   * <p>
   * <b>Note:</b> <strong>Do NOT use this in combination with {@link #setRowPrefixFilter(byte[])} or
   * {@link #setStartStopRowForPrefixScan(byte[])}.</strong> Doing so will make the scan result
   * unexpected or even undefined.
   * </p>
   * @param startRow row to start scanner at or after
   * @throws IllegalArgumentException if startRow does not meet criteria for a row key (when length
   *                                  exceeds {@link HConstants#MAX_ROW_LENGTH})
   * @deprecated since 2.0.0 and will be removed in 3.0.0. Use {@link #withStartRow(byte[])}
   *             instead. This method may change the inclusive of the stop row to keep compatible
   *             with the old behavior.
   * @see #withStartRow(byte[])
   * @see <a href="https://issues.apache.org/jira/browse/HBASE-17320">HBASE-17320</a>
   */
  @Deprecated
  public Scan setStartRow(byte[] startRow) {
    withStartRow(startRow);
    if (ClientUtil.areScanStartRowAndStopRowEqual(this.startRow, this.stopRow)) {
      // for keeping the old behavior that a scan with the same start and stop row is a get scan.
      this.includeStopRow = true;
    }
    return this;
  }

  /**
   * Set the start row of the scan.
   * <p>
   * If the specified row does not exist, the Scanner will start from the next closest row after the
   * specified row.
   * @param startRow row to start scanner at or after
   * @throws IllegalArgumentException if startRow does not meet criteria for a row key (when length
   *                                  exceeds {@link HConstants#MAX_ROW_LENGTH})
   */
  public Scan withStartRow(byte[] startRow) {
    return withStartRow(startRow, true);
  }

  /**
   * Set the start row of the scan.
   * <p>
   * If the specified row does not exist, or the {@code inclusive} is {@code false}, the Scanner
   * will start from the next closest row after the specified row.
   * <p>
   * <b>Note:</b> <strong>Do NOT use this in combination with {@link #setRowPrefixFilter(byte[])} or
   * {@link #setStartStopRowForPrefixScan(byte[])}.</strong> Doing so will make the scan result
   * unexpected or even undefined.
   * </p>
   * @param startRow  row to start scanner at or after
   * @param inclusive whether we should include the start row when scan
   * @throws IllegalArgumentException if startRow does not meet criteria for a row key (when length
   *                                  exceeds {@link HConstants#MAX_ROW_LENGTH})
   */
  public Scan withStartRow(byte[] startRow, boolean inclusive) {
    if (Bytes.len(startRow) > HConstants.MAX_ROW_LENGTH) {
      throw new IllegalArgumentException("startRow's length must be less than or equal to "
        + HConstants.MAX_ROW_LENGTH + " to meet the criteria" + " for a row key.");
    }
    this.startRow = startRow;
    this.includeStartRow = inclusive;
    return this;
  }

  /**
   * Set the stop row of the scan.
   * <p>
   * The scan will include rows that are lexicographically less than the provided stopRow.
   * <p>
   * <b>Note:</b> <strong>Do NOT use this in combination with {@link #setRowPrefixFilter(byte[])} or
   * {@link #setStartStopRowForPrefixScan(byte[])}.</strong> Doing so will make the scan result
   * unexpected or even undefined.
   * </p>
   * @param stopRow row to end at (exclusive)
   * @throws IllegalArgumentException if stopRow does not meet criteria for a row key (when length
   *                                  exceeds {@link HConstants#MAX_ROW_LENGTH})
   * @deprecated since 2.0.0 and will be removed in 3.0.0. Use {@link #withStopRow(byte[])} instead.
   *             This method may change the inclusive of the stop row to keep compatible with the
   *             old behavior.
   * @see #withStopRow(byte[])
   * @see <a href="https://issues.apache.org/jira/browse/HBASE-17320">HBASE-17320</a>
   */
  @Deprecated
  public Scan setStopRow(byte[] stopRow) {
    withStopRow(stopRow);
    if (ClientUtil.areScanStartRowAndStopRowEqual(this.startRow, this.stopRow)) {
      // for keeping the old behavior that a scan with the same start and stop row is a get scan.
      this.includeStopRow = true;
    }
    return this;
  }

  /**
   * Set the stop row of the scan.
   * <p>
   * The scan will include rows that are lexicographically less than the provided stopRow.
   * <p>
   * <b>Note:</b> When doing a filter for a rowKey <u>Prefix</u> use
   * {@link #setRowPrefixFilter(byte[])}. The 'trailing 0' will not yield the desired result.
   * </p>
   * @param stopRow row to end at (exclusive)
   * @throws IllegalArgumentException if stopRow does not meet criteria for a row key (when length
   *                                  exceeds {@link HConstants#MAX_ROW_LENGTH})
   */
  public Scan withStopRow(byte[] stopRow) {
    return withStopRow(stopRow, false);
  }

  /**
   * Set the stop row of the scan.
   * <p>
   * The scan will include rows that are lexicographically less than (or equal to if
   * {@code inclusive} is {@code true}) the provided stopRow.
   * <p>
   * <b>Note:</b> <strong>Do NOT use this in combination with {@link #setRowPrefixFilter(byte[])} or
   * {@link #setStartStopRowForPrefixScan(byte[])}.</strong> Doing so will make the scan result
   * unexpected or even undefined.
   * </p>
   * @param stopRow   row to end at
   * @param inclusive whether we should include the stop row when scan
   * @throws IllegalArgumentException if stopRow does not meet criteria for a row key (when length
   *                                  exceeds {@link HConstants#MAX_ROW_LENGTH})
   */
  public Scan withStopRow(byte[] stopRow, boolean inclusive) {
    if (Bytes.len(stopRow) > HConstants.MAX_ROW_LENGTH) {
      throw new IllegalArgumentException("stopRow's length must be less than or equal to "
        + HConstants.MAX_ROW_LENGTH + " to meet the criteria" + " for a row key.");
    }
    this.stopRow = stopRow;
    this.includeStopRow = inclusive;
    return this;
  }

  /**
   * <p>
   * Set a filter (using stopRow and startRow) so the result set only contains rows where the rowKey
   * starts with the specified prefix.
   * </p>
   * <p>
   * This is a utility method that converts the desired rowPrefix into the appropriate values for
   * the startRow and stopRow to achieve the desired result.
   * </p>
   * <p>
   * This can safely be used in combination with setFilter.
   * </p>
   * <p>
   * <strong>This CANNOT be used in combination with withStartRow and/or withStopRow.</strong> Such
   * a combination will yield unexpected and even undefined results.
   * </p>
   * @param rowPrefix the prefix all rows must start with. (Set <i>null</i> to remove the filter.)
   * @deprecated since 2.5.0, will be removed in 4.0.0. The name of this method is considered to be
   *             confusing as it does not use a {@link Filter} but uses setting the startRow and
   *             stopRow instead. Use {@link #setStartStopRowForPrefixScan(byte[])} instead.
   */
  public Scan setRowPrefixFilter(byte[] rowPrefix) {
    return setStartStopRowForPrefixScan(rowPrefix);
  }

  /**
   * <p>
   * Set a filter (using stopRow and startRow) so the result set only contains rows where the rowKey
   * starts with the specified prefix.
   * </p>
   * <p>
   * This is a utility method that converts the desired rowPrefix into the appropriate values for
   * the startRow and stopRow to achieve the desired result.
   * </p>
   * <p>
   * This can safely be used in combination with setFilter.
   * </p>
   * <p>
   * <strong>This CANNOT be used in combination with withStartRow and/or withStopRow.</strong> Such
   * a combination will yield unexpected and even undefined results.
   * </p>
   * @param rowPrefix the prefix all rows must start with. (Set <i>null</i> to remove the filter.)
   */
  public Scan setStartStopRowForPrefixScan(byte[] rowPrefix) {
    if (rowPrefix == null) {
      setStartRow(HConstants.EMPTY_START_ROW);
      setStopRow(HConstants.EMPTY_END_ROW);
    } else {
      this.setStartRow(rowPrefix);
      this.setStopRow(ClientUtil.calculateTheClosestNextRowKeyForPrefix(rowPrefix));
    }
    return this;
  }

  /**
   * Get all available versions.
   * @deprecated since 2.0.0 and will be removed in 3.0.0. It is easy to misunderstand with column
   *             family's max versions, so use {@link #readAllVersions()} instead.
   * @see #readAllVersions()
   * @see <a href="https://issues.apache.org/jira/browse/HBASE-17125">HBASE-17125</a>
   */
  @Deprecated
  public Scan setMaxVersions() {
    return readAllVersions();
  }

  /**
   * Get up to the specified number of versions of each column.
   * @param maxVersions maximum versions for each column
   * @deprecated since 2.0.0 and will be removed in 3.0.0. It is easy to misunderstand with column
   *             family's max versions, so use {@link #readVersions(int)} instead.
   * @see #readVersions(int)
   * @see <a href="https://issues.apache.org/jira/browse/HBASE-17125">HBASE-17125</a>
   */
  @Deprecated
  public Scan setMaxVersions(int maxVersions) {
    return readVersions(maxVersions);
  }

  /**
   * Get all available versions.
   */
  public Scan readAllVersions() {
    this.maxVersions = Integer.MAX_VALUE;
    return this;
  }

  /**
   * Get up to the specified number of versions of each column.
   * @param versions specified number of versions for each column
   */
  public Scan readVersions(int versions) {
    this.maxVersions = versions;
    return this;
  }

  /**
   * Set the maximum number of cells to return for each call to next(). Callers should be aware that
   * this is not equivalent to calling {@link #setAllowPartialResults(boolean)}. If you don't allow
   * partial results, the number of cells in each Result must equal to your batch setting unless it
   * is the last Result for current row. So this method is helpful in paging queries. If you just
   * want to prevent OOM at client, use setAllowPartialResults(true) is better.
   * @param batch the maximum number of values
   * @see Result#mayHaveMoreCellsInRow()
   */
  public Scan setBatch(int batch) {
    if (this.hasFilter() && this.filter.hasFilterRow()) {
      throw new IncompatibleFilterException(
        "Cannot set batch on a scan using a filter" + " that returns true for filter.hasFilterRow");
    }
    this.batch = batch;
    return this;
  }

  /**
   * Set the maximum number of values to return per row per Column Family
   * @param limit the maximum number of values returned / row / CF
   */
  public Scan setMaxResultsPerColumnFamily(int limit) {
    this.storeLimit = limit;
    return this;
  }

  /**
   * Set offset for the row per Column Family.
   * @param offset is the number of kvs that will be skipped.
   */
  public Scan setRowOffsetPerColumnFamily(int offset) {
    this.storeOffset = offset;
    return this;
  }

  /**
   * Set the number of rows for caching that will be passed to scanners. If not set, the
   * Configuration setting {@link HConstants#HBASE_CLIENT_SCANNER_CACHING} will apply. Higher
   * caching values will enable faster scanners but will use more memory.
   * @param caching the number of rows for caching
   */
  public Scan setCaching(int caching) {
    this.caching = caching;
    return this;
  }

  /** Returns the maximum result size in bytes. See {@link #setMaxResultSize(long)} */
  public long getMaxResultSize() {
    return maxResultSize;
  }

  /**
   * Set the maximum result size. The default is -1; this means that no specific maximum result size
   * will be set for this scan, and the global configured value will be used instead. (Defaults to
   * unlimited).
   * @param maxResultSize The maximum result size in bytes.
   */
  public Scan setMaxResultSize(long maxResultSize) {
    this.maxResultSize = maxResultSize;
    return this;
  }

  @Override
  public Scan setFilter(Filter filter) {
    super.setFilter(filter);
    return this;
  }

  /**
   * Setting the familyMap
   * @param familyMap map of family to qualifier
   */
  public Scan setFamilyMap(Map<byte[], NavigableSet<byte[]>> familyMap) {
    this.familyMap = familyMap;
    return this;
  }

  /**
   * Getting the familyMap
   */
  public Map<byte[], NavigableSet<byte[]>> getFamilyMap() {
    return this.familyMap;
  }

  /** Returns the number of families in familyMap */
  public int numFamilies() {
    if (hasFamilies()) {
      return this.familyMap.size();
    }
    return 0;
  }

  /** Returns true if familyMap is non empty, false otherwise */
  public boolean hasFamilies() {
    return !this.familyMap.isEmpty();
  }

  /** Returns the keys of the familyMap */
  public byte[][] getFamilies() {
    if (hasFamilies()) {
      return this.familyMap.keySet().toArray(new byte[0][0]);
    }
    return null;
  }

  /** Returns the startrow */
  public byte[] getStartRow() {
    return this.startRow;
  }

  /** Returns if we should include start row when scan */
  public boolean includeStartRow() {
    return includeStartRow;
  }

  /** Returns the stoprow */
  public byte[] getStopRow() {
    return this.stopRow;
  }

  /** Returns if we should include stop row when scan */
  public boolean includeStopRow() {
    return includeStopRow;
  }

  /** Returns the max number of versions to fetch */
  public int getMaxVersions() {
    return this.maxVersions;
  }

  /** Returns maximum number of values to return for a single call to next() */
  public int getBatch() {
    return this.batch;
  }

  /** Returns maximum number of values to return per row per CF */
  public int getMaxResultsPerColumnFamily() {
    return this.storeLimit;
  }

  /**
   * Method for retrieving the scan's offset per row per column family (#kvs to be skipped)
   * @return row offset
   */
  public int getRowOffsetPerColumnFamily() {
    return this.storeOffset;
  }

  /** Returns caching the number of rows fetched when calling next on a scanner */
  public int getCaching() {
    return this.caching;
  }

  /** Returns TimeRange */
  public TimeRange getTimeRange() {
    return this.tr;
  }

  /** Returns RowFilter */
  @Override
  public Filter getFilter() {
    return filter;
  }

  /** Returns true is a filter has been specified, false if not */
  public boolean hasFilter() {
    return filter != null;
  }

  /**
   * Set whether blocks should be cached for this Scan.
   * <p>
   * This is true by default. When true, default settings of the table and family are used (this
   * will never override caching blocks if the block cache is disabled for that family or entirely).
   * @param cacheBlocks if false, default settings are overridden and blocks will not be cached
   */
  public Scan setCacheBlocks(boolean cacheBlocks) {
    this.cacheBlocks = cacheBlocks;
    return this;
  }

  /**
   * Get whether blocks should be cached for this Scan.
   * @return true if default caching should be used, false if blocks should not be cached
   */
  public boolean getCacheBlocks() {
    return cacheBlocks;
  }

  /**
   * Set whether this scan is a reversed one
   * <p>
   * This is false by default which means forward(normal) scan.
   * @param reversed if true, scan will be backward order
   */
  public Scan setReversed(boolean reversed) {
    this.reversed = reversed;
    return this;
  }

  /**
   * Get whether this scan is a reversed one.
   * @return true if backward scan, false if forward(default) scan
   */
  public boolean isReversed() {
    return reversed;
  }

  /**
   * Setting whether the caller wants to see the partial results when server returns
   * less-than-expected cells. It is helpful while scanning a huge row to prevent OOM at client. By
   * default this value is false and the complete results will be assembled client side before being
   * delivered to the caller.
   * @see Result#mayHaveMoreCellsInRow()
   * @see #setBatch(int)
   */
  public Scan setAllowPartialResults(final boolean allowPartialResults) {
    this.allowPartialResults = allowPartialResults;
    return this;
  }

  /**
   * Returns true when the constructor of this scan understands that the results they will see may
   * only represent a partial portion of a row. The entire row would be retrieved by subsequent
   * calls to {@link ResultScanner#next()}
   */
  public boolean getAllowPartialResults() {
    return allowPartialResults;
  }

  @Override
  public Scan setLoadColumnFamiliesOnDemand(boolean value) {
    super.setLoadColumnFamiliesOnDemand(value);
    return this;
  }

  /**
   * Compile the table and column family (i.e. schema) information into a String. Useful for parsing
   * and aggregation by debugging, logging, and administration tools.
   */
  @Override
  public Map<String, Object> getFingerprint() {
    Map<String, Object> map = new HashMap<>();
    List<String> families = new ArrayList<>();
    if (this.familyMap.isEmpty()) {
      map.put("families", "ALL");
      return map;
    } else {
      map.put("families", families);
    }
    for (Map.Entry<byte[], NavigableSet<byte[]>> entry : this.familyMap.entrySet()) {
      families.add(Bytes.toStringBinary(entry.getKey()));
    }
    return map;
  }

  /**
   * Compile the details beyond the scope of getFingerprint (row, columns, timestamps, etc.) into a
   * Map along with the fingerprinted information. Useful for debugging, logging, and administration
   * tools.
   * @param maxCols a limit on the number of columns output prior to truncation
   */
  @Override
  public Map<String, Object> toMap(int maxCols) {
    // start with the fingerprint map and build on top of it
    Map<String, Object> map = getFingerprint();
    // map from families to column list replaces fingerprint's list of families
    Map<String, List<String>> familyColumns = new HashMap<>();
    map.put("families", familyColumns);
    // add scalar information first
    map.put("startRow", Bytes.toStringBinary(this.startRow));
    map.put("stopRow", Bytes.toStringBinary(this.stopRow));
    map.put("maxVersions", this.maxVersions);
    map.put("batch", this.batch);
    map.put("caching", this.caching);
    map.put("maxResultSize", this.maxResultSize);
    map.put("cacheBlocks", this.cacheBlocks);
    map.put("loadColumnFamiliesOnDemand", this.loadColumnFamiliesOnDemand);
    List<Long> timeRange = new ArrayList<>(2);
    timeRange.add(this.tr.getMin());
    timeRange.add(this.tr.getMax());
    map.put("timeRange", timeRange);
    int colCount = 0;
    // iterate through affected families and list out up to maxCols columns
    for (Map.Entry<byte[], NavigableSet<byte[]>> entry : this.familyMap.entrySet()) {
      List<String> columns = new ArrayList<>();
      familyColumns.put(Bytes.toStringBinary(entry.getKey()), columns);
      if (entry.getValue() == null) {
        colCount++;
        --maxCols;
        columns.add("ALL");
      } else {
        colCount += entry.getValue().size();
        if (maxCols <= 0) {
          continue;
        }
        for (byte[] column : entry.getValue()) {
          if (--maxCols <= 0) {
            continue;
          }
          columns.add(Bytes.toStringBinary(column));
        }
      }
    }
    map.put("totalColumns", colCount);
    if (this.filter != null) {
      map.put("filter", this.filter.toString());
    }
    // add the id if set
    if (getId() != null) {
      map.put("id", getId());
    }
    map.put("includeStartRow", includeStartRow);
    map.put("includeStopRow", includeStopRow);
    map.put("allowPartialResults", allowPartialResults);
    map.put("storeLimit", storeLimit);
    map.put("storeOffset", storeOffset);
    map.put("reversed", reversed);
    if (null != asyncPrefetch) {
      map.put("asyncPrefetch", asyncPrefetch);
    }
    map.put("mvccReadPoint", mvccReadPoint);
    map.put("limit", limit);
    map.put("readType", readType);
    map.put("needCursorResult", needCursorResult);
    map.put("targetReplicaId", targetReplicaId);
    map.put("consistency", consistency);
    if (!colFamTimeRangeMap.isEmpty()) {
      Map<String, List<Long>> colFamTimeRangeMapStr = colFamTimeRangeMap.entrySet().stream()
        .collect(Collectors.toMap((e) -> Bytes.toStringBinary(e.getKey()), e -> {
          TimeRange value = e.getValue();
          List<Long> rangeList = new ArrayList<>();
          rangeList.add(value.getMin());
          rangeList.add(value.getMax());
          return rangeList;
        }));

      map.put("colFamTimeRangeMap", colFamTimeRangeMapStr);
    }
    map.put("priority", getPriority());
    map.put("queryMetricsEnabled", queryMetricsEnabled);
    return map;
  }

  /**
   * Enable/disable "raw" mode for this scan. If "raw" is enabled the scan will return all delete
   * marker and deleted rows that have not been collected, yet. This is mostly useful for Scan on
   * column families that have KEEP_DELETED_ROWS enabled. It is an error to specify any column when
   * "raw" is set.
   * @param raw True/False to enable/disable "raw" mode.
   */
  public Scan setRaw(boolean raw) {
    setAttribute(RAW_ATTR, Bytes.toBytes(raw));
    return this;
  }

  /** Returns True if this Scan is in "raw" mode. */
  public boolean isRaw() {
    byte[] attr = getAttribute(RAW_ATTR);
    return attr == null ? false : Bytes.toBoolean(attr);
  }

  /**
   * Set whether this scan is a small scan
   * <p>
   * Small scan should use pread and big scan can use seek + read seek + read is fast but can cause
   * two problem (1) resource contention (2) cause too much network io [89-fb] Using pread for
   * non-compaction read request https://issues.apache.org/jira/browse/HBASE-7266 On the other hand,
   * if setting it true, we would do openScanner,next,closeScanner in one RPC call. It means the
   * better performance for small scan. [HBASE-9488]. Generally, if the scan range is within one
   * data block(64KB), it could be considered as a small scan.
   * @param small set if that should use read type of PREAD
   * @deprecated since 2.0.0 and will be removed in 3.0.0. Use {@link #setLimit(int)} and
   *             {@link #setReadType(ReadType)} instead. And for the one rpc optimization, now we
   *             will also fetch data when openScanner, and if the number of rows reaches the limit
   *             then we will close the scanner automatically which means we will fall back to one
   *             rpc.
   * @see #setLimit(int)
   * @see #setReadType(ReadType)
   * @see <a href="https://issues.apache.org/jira/browse/HBASE-17045">HBASE-17045</a>
   */
  @Deprecated
  public Scan setSmall(boolean small) {
    this.small = small;
    if (small) {
      this.readType = ReadType.PREAD;
    }
    return this;
  }

  /**
   * Get whether this scan is a small scan
   * @return true if small scan
   * @deprecated since 2.0.0 and will be removed in 3.0.0. See the comment of
   *             {@link #setSmall(boolean)}
   * @see <a href="https://issues.apache.org/jira/browse/HBASE-17045">HBASE-17045</a>
   */
  @Deprecated
  public boolean isSmall() {
    return small;
  }

  @Override
  public Scan setAttribute(String name, byte[] value) {
    super.setAttribute(name, value);
    return this;
  }

  @Override
  public Scan setId(String id) {
    super.setId(id);
    return this;
  }

  @Override
  public Scan setAuthorizations(Authorizations authorizations) {
    super.setAuthorizations(authorizations);
    return this;
  }

  @Override
  public Scan setACL(Map<String, Permission> perms) {
    super.setACL(perms);
    return this;
  }

  @Override
  public Scan setACL(String user, Permission perms) {
    super.setACL(user, perms);
    return this;
  }

  @Override
  public Scan setConsistency(Consistency consistency) {
    super.setConsistency(consistency);
    return this;
  }

  @Override
  public Scan setReplicaId(int Id) {
    super.setReplicaId(Id);
    return this;
  }

  @Override
  public Scan setIsolationLevel(IsolationLevel level) {
    super.setIsolationLevel(level);
    return this;
  }

  @Override
  public Scan setPriority(int priority) {
    super.setPriority(priority);
    return this;
  }

  /**
   * Enable collection of {@link ScanMetrics}. For advanced users. While disabling scan metrics,
   * will also disable region level scan metrics.
   * @param enabled Set to true to enable accumulating scan metrics
   */
  public Scan setScanMetricsEnabled(final boolean enabled) {
    setAttribute(Scan.SCAN_ATTRIBUTES_METRICS_ENABLE, Bytes.toBytes(Boolean.valueOf(enabled)));
    if (!enabled) {
      setEnableScanMetricsByRegion(false);
    }
    return this;
  }

  /** Returns True if collection of scan metrics is enabled. For advanced users. */
  public boolean isScanMetricsEnabled() {
    byte[] attr = getAttribute(Scan.SCAN_ATTRIBUTES_METRICS_ENABLE);
    return attr == null ? false : Bytes.toBoolean(attr);
  }

  /**
   * @return Metrics on this Scan, if metrics were enabled.
   * @see #setScanMetricsEnabled(boolean)
   * @deprecated Use {@link ResultScanner#getScanMetrics()} instead. And notice that, please do not
   *             use this method and {@link ResultScanner#getScanMetrics()} together, the metrics
   *             will be messed up.
   */
  @Deprecated
  public ScanMetrics getScanMetrics() {
    byte[] bytes = getAttribute(Scan.SCAN_ATTRIBUTES_METRICS_DATA);
    if (bytes == null) return null;
    return ProtobufUtil.toScanMetrics(bytes);
  }

  public Boolean isAsyncPrefetch() {
    return asyncPrefetch;
  }

  public Scan setAsyncPrefetch(boolean asyncPrefetch) {
    this.asyncPrefetch = asyncPrefetch;
    return this;
  }

  /** Returns the limit of rows for this scan */
  public int getLimit() {
    return limit;
  }

  /**
   * Set the limit of rows for this scan. We will terminate the scan if the number of returned rows
   * reaches this value.
   * <p>
   * This condition will be tested at last, after all other conditions such as stopRow, filter, etc.
   * @param limit the limit of rows for this scan
   */
  public Scan setLimit(int limit) {
    this.limit = limit;
    return this;
  }

  /**
   * Call this when you only want to get one row. It will set {@code limit} to {@code 1}, and also
   * set {@code readType} to {@link ReadType#PREAD}.
   */
  public Scan setOneRowLimit() {
    return setLimit(1).setReadType(ReadType.PREAD);
  }

  @InterfaceAudience.Public
  public enum ReadType {
    DEFAULT,
    STREAM,
    PREAD
  }

  /** Returns the read type for this scan */
  public ReadType getReadType() {
    return readType;
  }

  /**
   * Set the read type for this scan.
   * <p>
   * Notice that we may choose to use pread even if you specific {@link ReadType#STREAM} here. For
   * example, we will always use pread if this is a get scan.
   */
  public Scan setReadType(ReadType readType) {
    this.readType = readType;
    return this;
  }

  /**
   * Get the mvcc read point used to open a scanner.
   */
  long getMvccReadPoint() {
    return mvccReadPoint;
  }

  /**
   * Set the mvcc read point used to open a scanner.
   */
  Scan setMvccReadPoint(long mvccReadPoint) {
    this.mvccReadPoint = mvccReadPoint;
    return this;
  }

  /**
   * Set the mvcc read point to -1 which means do not use it.
   */
  Scan resetMvccReadPoint() {
    return setMvccReadPoint(-1L);
  }

  /**
   * When the server is slow or we scan a table with many deleted data or we use a sparse filter,
   * the server will response heartbeat to prevent timeout. However the scanner will return a Result
   * only when client can do it. So if there are many heartbeats, the blocking time on
   * ResultScanner#next() may be very long, which is not friendly to online services. Set this to
   * true then you can get a special Result whose #isCursor() returns true and is not contains any
   * real data. It only tells you where the server has scanned. You can call next to continue
   * scanning or open a new scanner with this row key as start row whenever you want. Users can get
   * a cursor when and only when there is a response from the server but we can not return a Result
   * to users, for example, this response is a heartbeat or there are partial cells but users do not
   * allow partial result. Now the cursor is in row level which means the special Result will only
   * contains a row key. {@link Result#isCursor()} {@link Result#getCursor()} {@link Cursor}
   */
  public Scan setNeedCursorResult(boolean needCursorResult) {
    this.needCursorResult = needCursorResult;
    return this;
  }

  public boolean isNeedCursorResult() {
    return needCursorResult;
  }

  /**
   * Create a new Scan with a cursor. It only set the position information like start row key. The
   * others (like cfs, stop row, limit) should still be filled in by the user.
   * {@link Result#isCursor()} {@link Result#getCursor()} {@link Cursor}
   */
  public static Scan createScanFromCursor(Cursor cursor) {
    return new Scan().withStartRow(cursor.getRow());
  }

  /**
   * Enables region level scan metrics. If scan metrics are disabled then first enables scan metrics
   * followed by region level scan metrics.
   * @param enable Set to true to enable region level scan metrics.
   */
  public Scan setEnableScanMetricsByRegion(final boolean enable) {
    if (enable) {
      setScanMetricsEnabled(true);
    }
    setAttribute(Scan.SCAN_ATTRIBUTES_METRICS_BY_REGION_ENABLE, Bytes.toBytes(enable));
    return this;
  }

  public boolean isScanMetricsByRegionEnabled() {
    byte[] attr = getAttribute(Scan.SCAN_ATTRIBUTES_METRICS_BY_REGION_ENABLE);
    return attr != null && Bytes.toBoolean(attr);
  }
}