=Ver: 2.0 ##---------------------------------------- =Pkg: Par 1.52 9.2 i586 =Sum: A paragraph reformatter +Des: Par is a paragraph reformatter, similar to the standard Unix fmt filter, but better. It uses a dynamic programming algorithm, which produces much better-looking line breaks than the greedy algorithm used by fmt. It can also deal correctly with a variety of quotation and comment conventions. NOTE: This package should really be named "par" not "Par". It has existed thus since at least 1993. But it was never packaged for openSUSE before now and, being fairly obscure and little known, a more recent utility from http://parchive.sourceforge.net, or at least the openSUSE packaging of it, has already been using the name "par" for some time, AND, at least one other package, "dar" expects and depends on this. So this package can't realistically use it's own rightful name as it would conflict with gpar/par-cmdline, and break -at least- dar, which are both more widely installed and used and so can't be changed easily now. -Des: ##---------------------------------------- =Pkg: ansible 1.2 3.1 i586 =Sum: SSH-based configuration management, deployment, and task execution system +Des: Ansible is a radically simple model-driven configuration management, multi-node deployment, and remote task execution system. Ansible works over SSH and does not require any software or daemons to be installed on remote nodes. Extension modules can be written in any language and are transferred to managed machines automatically. -Des: ##---------------------------------------- =Pkg: ansible-fireball 1.2 3.1 i586 =Sum: Ansible fireball transport support +Des: Ansible can optionally use a 0MQ based transport mechanism, which is considerably faster than the standard ssh mechanism when there are multiple actions, but requires additional supporting packages. -Des: ##---------------------------------------- =Pkg: ansible-node-fireball 1.2 3.1 i586 =Sum: Ansible fireball transport - node end support +Des: Ansible can optionally use a 0MQ based transport mechanism, which has additional requirements for nodes to use. This package includes those requirements. -Des: ##---------------------------------------- =Pkg: bash 4.3 292.1 i586 =Sum: The GNU Bourne-Again Shell +Des: Bash is an sh-compatible command interpreter that executes commands read from standard input or from a file. Bash incorporates useful features from the Korn and C shells (ksh and csh). Bash is intended to be a conformant implementation of the IEEE Posix Shell and Tools specification (IEEE Working Group 1003.2). -Des: ##---------------------------------------- =Pkg: bash-doc 4.3 292.1 i586 =Sum: Documentation how to Use the GNU Bourne-Again Shell +Des: This package contains the documentation for using the bourne shell interpreter Bash. -Des: ##---------------------------------------- =Pkg: bash-lang 4.3 292.1 i586 =Sum: Languages for package bash +Des: Provides translations to the package bash -Des: ##---------------------------------------- =Pkg: bash-loadables 4.3 292.1 i586 =Sum: Loadable bash builtins +Des: This package contains the examples for the ready-to-dynamic-load builtins found in the source tar ball of the bash: basename Return non-directory portion of pathname. cut cut(1) replacement. dirname Return directory portion of pathname. finfo Print file info. getconf POSIX.2 getconf utility. head Copy first part of files. id POSIX.2 user identity. ln Make links. logname Print login name of current user. mkdir Make directories. pathchk Check pathnames for validity and portability. print Loadable ksh-93 style print builtin. printenv Minimal builtin clone of BSD printenv(1). push Anyone remember TOPS-20? realpath Canonicalize pathnames, resolving symlinks. rmdir Remove directory. sleep sleep for fractions of a second. strftime Loadable builtin interface to strftime(3). sync Sync the disks by forcing pending filesystem writes to complete. tee Duplicate standard input. tty Return terminal name. uname Print system information. unlink Remove a directory entry. whoami Print out username of current user. -Des: ##---------------------------------------- =Pkg: ckermit 8.0.211 111.2 i586 =Sum: A Combined Serial and Network Communication Software Package +Des: C-Kermit is a combined serial and network communication software package offering a consistent, medium-independent, and cross-platform approach to connection establishment, terminal sessions, file transfer, character-set translation, and automation of communication tasks. -Des: ##---------------------------------------- =Pkg: curl 7.42.1 3.1 i586 =Sum: A Tool for Transferring Data from URLs +Des: Curl is a client to get documents and files from or send documents to a server using any of the supported protocols (HTTP, HTTPS, FTP, FTPS, TFTP, DICT, TELNET, LDAP, or FILE). The command is designed to work without user interaction or any kind of interactivity. -Des: ##---------------------------------------- =Pkg: cyclades-serial-client 0.93.svn43.aljex1 5.2 i586 =Sum: Serial Port Interface for Cyclades Terminal Servers +Des: cyclades-serial-client is an RFC 2217 compliant client. It works with servers such as sercd, and Cyclades and OpenGrear terminal servers. -Des: ##---------------------------------------- =Pkg: dd_rescue 1.40_0.3.0 6.1 i586 =Sum: Data Copying in the Presence of I/O Errors +Des: dd_rescue helps when nothing else can: your disk has crashed and you try to copy it over to another one. While standard Unix tools like cp, cat, and dd will "abort" on every I/O error, dd_rescue does not. It optimizes copying by using large blocks as long as no errors occur and falls back to smaller blocks. It supports reverse direction copying (to approach a bad spot from the top), sparse copying, preallocating space, splice zerocopy, and bypassing the kernel pagecache with O_DIRECT. This RPM also bundles a helper script dd_rhelp from Lab Valentin that intelligently controls dd_rescue to first copy all blocks from areas that work and only then tries to approach the bad spots from both sides. Authors: -------- Kurt Garloff Lab Valentin -Des: ##---------------------------------------- =Pkg: errno 1.1.1 1.2 i586 =Sum: Displays the meanings of numeric errno values +Des: Displays the meanings of numeric errno values http://www.pccl.demon.co.uk/C/errno.html -Des: ##---------------------------------------- =Pkg: fdupes 1.51 3.1 i586 =Sum: Identifying or deleting duplicate files +Des: FDUPES is a program for identifying or deleting duplicate files residing within specified directories -Des: ##---------------------------------------- =Pkg: ghostpdl 9.07 1.2 i586 =Sum: Implementation of the PCL-5 and PCL-XL family of page description languages +Des: GhostPDL (formerly GhostPCL) is Artifex Software's implementation of the PCL-5 and PCL-XL family of page description languages. For more information please see the documentation included with the source package. GhostPDL is PCL technology; it is not intended to be a finished software application but a collection of software components that will ultimately be included in a software application or a real time embedded system. Generally the GhostPDL languages are compliant with the Genoa (now QualityLogic) Functional Test Suite and the Genoa Application Test suite. Also each language should run the corresponding Genoa Comprehensive Evaluation Test (CET) without egregious errors. -Des: ##---------------------------------------- =Pkg: gnu_ddrescue 1.14 11.2 i586 =Sum: GNU ddrescue, a data recovery tool +Des: GNU ddrescue is a data recovery tool. It copies data from one file or block device (hard disc, cdrom, etc) to another, trying hard to rescue data in case of read errors. Ddrescue does not truncate the output file if not asked to. So, every time you run it on the same output file, it tries to fill in the gaps. The basic operation of ddrescue is fully automatic. That is, you don't have to wait for an error, stop the program, read the log, run it in reverse mode, etc. -Des: ##---------------------------------------- =Pkg: hylafax+ 5.5.8 4.1 i586 =Sum: HylaFAX+(tm) is a enterprise-strength fax server +Des: HylaFAX(tm) is a enterprise-strength fax server supporting Class 1 and 2 fax modems on UNIX systems. It provides spooling services and numerous supporting fax management tools. The fax clients may reside on machines different from the server and client implementations exist for a number of platforms including windows. This package, HylaFAX+, is an enhanced fork of the original HylaFAX. -Des: ##---------------------------------------- =Pkg: inotify-tools 3.14 4.2 i586 =Sum: Command Line Utilities for inotify +Des: inotify-tools is a set of command line utilities for the Linux inotify filesystem change notification system. It currently consists of only one utility, "inotifywait", which is used to wait for changes to a file from a shell script. -Des: ##---------------------------------------- =Pkg: jbigkit 2.1 36.1 i586 =Sum: JBIG1 lossless image compression tools +Des: The jbigkit package contains tools for converting between PBM and JBIG1 formats. -Des: ##---------------------------------------- =Pkg: jbigkit-debuginfo 2.1 36.1 i586 =Sum: Debug information for package jbigkit +Des: This package provides debug information for package jbigkit. Debug information is useful when developing applications that use this package or when debugging this package. -Des: ##---------------------------------------- =Pkg: libcurl-devel 7.42.1 3.1 i586 =Sum: A Tool for Transferring Data from URLs +Des: Curl is a client to get documents and files from or send documents to a server using any of the supported protocols (HTTP, HTTPS, FTP, GOPHER, DICT, TELNET, LDAP, or FILE). The command is designed to work without user interaction or any kind of interactivity. -Des: ##---------------------------------------- =Pkg: libcurl4 7.42.1 3.1 i586 =Sum: cURL shared library version 4 +Des: cURL shared library version 4. -Des: ##---------------------------------------- =Pkg: libfallocate-devel 0.1.1 40.1 i586 =Sum: Header and devel files for libfallocate +Des: This package contains the header file and the .so library to link against for apps that want to use libfallocate. -Des: ##---------------------------------------- =Pkg: libfallocate-devel-static 0.1.1 40.1 i586 =Sum: Static library for libfallocate +Des: This package contains the static library for apps apps that want to use libfallocate statically. -Des: ##---------------------------------------- =Pkg: libfallocate0 0.1.1 40.1 i586 =Sum: Filesystem preallocation interface library +Des: libfallocate provides an interface for applications to tell filesystems about the size of to-be-written files, so the filesystem can do a better job in taking allocation decisions to avoid fragmentation. libfallocate provides a wrapper for the fallocate() syscall in case your glibc (<2.10) does not have it yet. It also provides linux_fallocate() which will attempt the space reservation ioctl that xfs and ocfs2 provide in case fallocate() did not succeed. It has an additional richer interface fallocate_with_fallback() that allows you to instruct it to fallback to do preallocation by zeroing things out (like posix_fallocate()) or to extend the file size by a sparse write (like a successful fallocate() with mode==0 would have done). -Des: ##---------------------------------------- =Pkg: libinotifytools-devel 3.14 4.2 i586 =Sum: Development files for inotify +Des: Files needed to develop applications based on libinotify. -Des: ##---------------------------------------- =Pkg: libinotifytools0 3.14 4.2 i586 =Sum: Library for inotify +Des: Library needed by inotify. -Des: ##---------------------------------------- =Pkg: libjbig-devel 2.1 36.1 i586 =Sum: JBIG1 lossless image compression library -- development files +Des: The libjbig-devel package contains files needed for development using the JBIG-KIT image compression library. -Des: ##---------------------------------------- =Pkg: libjbig2 2.1 36.1 i586 =Sum: JBIG1 lossless image compression library +Des: JBIG-KIT provides a portable library of compression and decompression functions with a documented interface that you can include very easily into your image or document processing software. In addition, JBIG-KIT provides ready-to-use compression and decompression programs with a simple command line interface (similar to the converters found in netpbm). JBIG-KIT implements the specification: ISO/IEC 11544:1993 and ITU-T Recommendation T.82(1993): Information technology — Coded representation of picture and audio information — Progressive bi-level image compression which is commonly referred to as the “JBIG1 standard” -Des: ##---------------------------------------- =Pkg: libltdl7 2.4.2 6.1 i586 =Sum: Libtool Runtime Library +Des: Library needed by programs that use the ltdl interface of GNU libtool. Authors: -------- Gordon Matzigkeit Alexandre Oliva Thomas Tanner Gary V. Vaughan Ossama Othman Robert Boehne Bob Friesenhahn -Des: ##---------------------------------------- =Pkg: liblzma5 5.2.2 100.1 i586 =Sum: LZMA library +Des: Library for encoding/decoding LZMA files. -Des: ##---------------------------------------- =Pkg: libopenssl-devel 1.0.1p 2.53.1 i586 =Sum: Include Files and Libraries mandatory for Development +Des: This package contains all necessary include files and libraries needed to develop applications that require these. -Des: ##---------------------------------------- =Pkg: libopenssl1_0_0 1.0.1p 2.53.1 i586 =Sum: Secure Sockets and Transport Layer Security +Des: The OpenSSL Project is a collaborative effort to develop a robust, commercial-grade, full-featured, and open source toolkit implementing the Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1) protocols with full-strength cryptography. The project is managed by a worldwide community of volunteers that use the Internet to communicate, plan, and develop the OpenSSL toolkit and its related documentation. Derivation and License OpenSSL is based on the excellent SSLeay library developed by Eric A. Young and Tim J. Hudson. The OpenSSL toolkit is licensed under an Apache-style license, which basically means that you are free to get it and to use it for commercial and noncommercial purposes. -Des: ##---------------------------------------- =Pkg: libreadline6 6.3 292.1 i586 =Sum: The Readline Library +Des: The readline library is used by the Bourne Again Shell (bash, the standard command interpreter) for easy editing of command lines. This includes history and search functionality. -Des: ##---------------------------------------- =Pkg: libssh2-1 1.4.3 6.1 i586 =Sum: A library implementing the SSH2 protocol +Des: libssh2 is a library implementing the SSH2 protocol as defined by Internet Drafts: SECSH-TRANS, SECSH-USERAUTH, SECSH-CONNECTION, SECSH-ARCH, SECSH-FILEXFER, SECSH-DHGEX, SECSH-NUMBERS, and SECSH-PUBLICKEY. -Des: ##---------------------------------------- =Pkg: libssh2-devel 1.4.3 6.1 i586 =Sum: A library implementing the SSH2 protocol +Des: libssh2 is a library implementing the SSH2 protocol as defined by Internet Drafts: SECSH-TRANS, SECSH-USERAUTH, SECSH-CONNECTION, SECSH-ARCH, SECSH-FILEXFER, SECSH-DHGEX, SECSH-NUMBERS, and SECSH-PUBLICKEY. -Des: ##---------------------------------------- =Pkg: libtiff-devel 4.0.3 77.1 i586 =Sum: Development Tools for Programs which will use the libtiff Library +Des: This package contains the header files and static libraries for developing programs which will manipulate TIFF format image files using the libtiff library. -Des: ##---------------------------------------- =Pkg: libtiff5 4.0.3 77.1 i586 =Sum: The Tiff Library (with JPEG and compression support) +Des: This package includes the tiff libraries. To link a program with libtiff, you will have to add -ljpeg and -lz to include the necessary libjpeg and libz in the linking process. -Des: ##---------------------------------------- =Pkg: libtool 2.4.2 6.1 i586 =Sum: A Tool to Build Shared Libraries +Des: GNU libtool is a set of shell scripts to automatically configure UNIX architectures to build shared libraries in a generic fashion. Authors: -------- Gordon Matzigkeit Alexandre Oliva Thomas Tanner Gary V. Vaughan Ossama Othman Robert Boehne Bob Friesenhahn -Des: ##---------------------------------------- =Pkg: libyaml-0-2 0.1.4 2.1 i586 =Sum: Shared library from libyaml +Des: A YAML 1.1 parser and emitter written in C This package holds the shared library of libyaml. -Des: ##---------------------------------------- =Pkg: libyaml-devel 0.1.4 2.1 i586 =Sum: Development files for libyaml +Des: A YAML 1.1 parser and emitter written in C This package holds the development files for libyaml. -Des: ##---------------------------------------- =Pkg: libzmq3 3.2.4 20.1 i586 =Sum: Shared Library for ZeroMQ +Des: The 0MQ lightweight messaging kernel is a library which extends the standard socket interfaces with features traditionally provided by specialised messaging middleware products. 0MQ sockets provide an abstraction of asynchronous message queues, multiple messaging patterns, message filtering (subscriptions), seamless access to multiple transport protocols and more. This package holds the shared library part of the ZeroMQ package. -Des: ##---------------------------------------- =Pkg: mpack 1.6 2.2 i586 =Sum: Pack/Unpack messages in MIME format +Des: Mpack and munpack are utilities for encoding and decoding (respectively) binary files in MIME (Multipurpose Internet Mail Extensions) format mail messages. For compatibility with older forms of transferring binary files, the munpack program can also decode messages in split-uuencoded format. The Macintosh version can also decode messages in split-BinHex format. This MIME implementation is intended to be as simple and portable as possible. For a more sophisticated MIME implementation, MetaMail. -Des: ##---------------------------------------- =Pkg: ncompress 4.2.4.4 3.1 i586 =Sum: Fast compression and decompression utilities +Des: The ncompress package contains the compress and uncompress file compression and decompression utilities, which are compatible with the original UNIX compress utility (.Z file extensions). These utilities can't handle gzipped (.gz file extensions) files, but gzip can handle compressed files. Install ncompress if you need compression/decompression utilities which are compatible with the original UNIX compress utility. -Des: ##---------------------------------------- =Pkg: openssl 1.0.1p 2.53.1 i586 =Sum: Secure Sockets and Transport Layer Security +Des: The OpenSSL Project is a collaborative effort to develop a robust, commercial-grade, full-featured, and open source toolkit implementing the Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1) protocols with full-strength cryptography. The project is managed by a worldwide community of volunteers that use the Internet to communicate, plan, and develop the OpenSSL toolkit and its related documentation. Derivation and License OpenSSL is based on the excellent SSLeay library developed by Eric A. Young and Tim J. Hudson. The OpenSSL toolkit is licensed under an Apache-style license, which basically means that you are free to get it and to use it for commercial and noncommercial purposes. -Des: ##---------------------------------------- =Pkg: openssl-doc 1.0.1p 2.53.1 i586 =Sum: Additional Package Documentation +Des: This package contains optional documentation provided in addition to this package's base documentation. -Des: ##---------------------------------------- =Pkg: pbzip2 1.1.13 28.1 i586 =Sum: Parallelized Implementation of bzip2 +Des: PBZIP2 is a parallel implementation of the bzip2 block-sorting file compressor that uses pthreads and achieves near-linear speedup on SMP machines. -Des: ##---------------------------------------- =Pkg: pv 1.6.0 31.1 i586 =Sum: PipeViewer - Monitor the Progress of Data through Pipes +Des: PV ("Pipe Viewer") is a tool for monitoring the progress of data through a pipeline. It can be inserted into any normal pipeline between two processes to give a visual indication of how quickly data is passing through, how long it has taken, how near to completion it is, and an estimate of how long it will be until completion. -Des: ##---------------------------------------- =Pkg: rdiff-backup-unstable 1.3.3 4.1 i586 =Sum: Convenient and transparent local/remote incremental mirror/backup +Des: rdiff-backup backs up one directory to another, possibly over a network. The target directory ends up a copy of the source directory, but extra reverse diffs are stored in a special subdirectory of that target directory, so you can still recover files lost some time ago. The idea is to combine the best features of a mirror and an incremental backup. rdiff-backup also preserves subdirectories, hard links, dev files, permissions, uid/gid ownership, and modification times. Also, rdiff-backup can operate in a bandwidth efficient manner over a pipe, like rsync. Thus you can use rdiff-backup and ssh to securely back a hard drive up to a remote location, and only the differences will be transmitted. Finally, rdiff-backup is easy to use and settings have sensical defaults. Note that this package contains the UNSTABLE version of rdiff-backup, containing the latest features but potentially more bugs than the stable one. -Des: ##---------------------------------------- =Pkg: readline-devel 6.3 292.1 i586 =Sum: Include Files and Libraries mandatory for Development +Des: This package contains all necessary include files and libraries needed to develop applications that require these. -Des: ##---------------------------------------- =Pkg: readline-doc 6.3 292.1 i586 =Sum: Documentation how to Use and Program with the Readline Library +Des: This package contains the documentation for using the readline library as well as programming with the interface of the readline library. -Des: ##---------------------------------------- =Pkg: redis 3.2.3 74.1 i586 =Sum: Persistent key-value database +Des: Redis is an advanced key-value store. It is similar to memcached but the dataset is not volatile, and values can be strings, exactly like in memcached, but also lists, sets, and ordered sets. All this data types can be manipulated with atomic operations to push/pop elements, add/remove elements, perform server side union, intersection, difference between sets, and so forth. Redis supports different kind of sorting abilities. -Des: ##---------------------------------------- =Pkg: rlpr 2.06 24.2 i586 =Sum: Remote printing utilities +Des: The rlpr package makes it possible (or at the very least, easier) to print files on remote sites to your local printer. It includes BSD-compatible replacements for `lpr', `lpq', and `lprm', whose functionality is a superset of their BSD counterparts. In other words, with the rlpr package, you can do everything you could do with the BSD printing commands, and more. The programs are all GPL'd and are more lightweight, cleaner and secure than their BSD equivalents. -Des: ##---------------------------------------- =Pkg: rsync 3.1.0 5.1 i586 =Sum: Replacement for RCP/mirror that has Many More Features +Des: rsync uses the "rsync algorithm" which provides a very fast method for bringing remote files into sync. It does this by sending just the differences in the files across the link, without requiring that both sets of files be present at one of the ends of the link beforehand. At first glance, this may seem impossible because the calculation of diffs between two files normally requires local access to both files. A technical report describing the rsync algorithm is included with this package. -Des: ##---------------------------------------- =Pkg: sercd 3.0.0 1.2 i586 =Sum: RFC 2217-compliant serial port redirector +Des: sercd is an RFC 2217 compliant serial port redirector originally based on sredird. Other similiar projects are ser2net and msredird. -Des: ##---------------------------------------- =Pkg: slowcat 1.0.1 5.2 i586 =Sum: cat files slowly ##---------------------------------------- =Pkg: tiff 4.0.3 77.1 i586 =Sum: Tools for Converting from and to the Tiff Format +Des: This package contains the library and support programs for the TIFF image format. -Des: ##---------------------------------------- =Pkg: ttyrec 1.0.8 3.1 i586 =Sum: Terminal Recorder and Player +Des: ttyrec is a tty recorder. Recorded data can be played back with the included ttyplay command. ttyrec is just a derivative of script command for recording timing information with microsecond accuracy as well. It can record emacs -nw, vi, lynx, or any programs running on tty. -Des: ##---------------------------------------- =Pkg: ttysnoop 0.12d 17.2 i586 =Sum: Tty multiplxer +Des: ttysnoop allows one or more users to share a common tty. Example: User-B can connect to User-A's tty and they both may enter keystrokes into, and see the output from, User-A's program. Similar to DoubleVision, but without all (any) of DV's frills and nicities, Such as: * translation between different types of terminals on connected tty's * a truckload of user/group permissions controls * an interactive app for selecting tty's to look at and doing configuration * chat * kernel level access in order to work with _any_ tty, even ones created by proprietary daemons that don't call any external login program, such as FacetWin. Author: Carl Declerck Patches: Many people at debian and redhat and elsewhere. -Des: ##---------------------------------------- =Pkg: urlenc 1.0.0 8.2 i586 =Sum: Translates text between ASCII and URL-encoded form. +Des: Translates text between ASCII and URL-encoded form. URL encoding of a character consists of a "%" symbol, followed by the two-digit hexadecimal representation (case-insensitive) of the ISO-Latin code point for the character. Authors: -------- Andrew Smallshaw Brian K. White -Des: ##---------------------------------------- =Pkg: xz 5.2.2 100.1 i586 =Sum: A Program for Compressing Files +Des: The xz command is a very powerful program for compressing files. * Average compression ratio of LZMA is about 30% better than that of gzip, and 15% better than that of bzip2. * Decompression speed is only little slower than that of gzip, being two to five times faster than bzip2. * In fast mode, compresses faster than bzip2 with a comparable compression ratio. * Achieving the best compression ratios takes four to even twelve times longer than with bzip2. However. this doesn't affect decompressing speed. * Very similar command line interface to what gzip and bzip2 have. -Des: ##---------------------------------------- =Pkg: xz-devel 5.2.2 100.1 i586 =Sum: Development package for the LZMA library +Des: This package contains the header files and libraries needed for compiling programs using the LZMA library. -Des: ##---------------------------------------- =Pkg: zeromq-devel 3.2.4 20.1 i586 =Sum: Development files for ZeroMQ +Des: The 0MQ lightweight messaging kernel is a library which extends the standard socket interfaces with features traditionally provided by specialised messaging middleware products. 0MQ sockets provide an abstraction of asynchronous message queues, multiple messaging patterns, message filtering (subscriptions), seamless access to multiple transport protocols and more. This package holds the development files for ZeroMQ. -Des: ##---------------------------------------- =Pkg: byobu 5.87 15.1 noarch =Sum: Enhanced profile and configuration utilities for GNU screen and tmux +Des: Byobu is an elegant enhancement of the otherwise functional, plain, practical GNU Screen. Byobu includes an enhanced profile and configuration utilities for the GNU screen window manager, such as toggle-able system status notifications. -Des: ##---------------------------------------- =Pkg: fail2ban 0.8.14 57.1 noarch =Sum: Bans IP addresses that make too many authentication failures +Des: Fail2ban scans log files like /var/log/messages and bans IP addresses that makes too many password failures. It updates firewall rules to reject the IP address, can send e-mails, or set host.deny entries. These rules can be defined by the user. Fail2Ban can read multiple log files such as sshd or Apache web server ones. -Des: ##---------------------------------------- =Pkg: gpg-offline 0.1 8.1 noarch =Sum: Trusted GPG Offline Keyring Manipulation Tool +Des: A tool to manipulate with locally stored keyrings. Package sources can contain keyrings with keys used by upstream developers for signing of their project tarballs. Keys can be verified offline during building process. Package includes RPM macros for build-time offline verification of upstream tarballs during build. -Des: ##---------------------------------------- =Pkg: lns 8171 1.2 noarch =Sum: symlink creation utility +Des: lns creates symbolic links. The standard command ln -s also does this, but it interprets its first argument as the literal text to be placed in the symlink. If your current working directory is not the same as the target directory, this can get confusing. For example, to create a symlink to a file hello.c in a subdirectory programs, you would have to write ln -s ../hello.c programs, even though hello.c is actually in your current directory, not one level up. In particular, this is unhelpful because it makes it difficult to use tab completion to set up the command line. lns solves this problem, by creating symlinks using the obvious semantics you would expect from mv or cp. All of its arguments are expected to be either absolute path names, or relative to the current working directory. So, in the above example, you would write lns hello.c programs/hello.c or just lns hello.c programs, exactly as you would have done if the command had been cp; and lns will figure out for itself that the literal text of the symlink needs to be ../hello.c. lns also has a mode in which it will create a symlink mirror of an entire directory tree: that is, instead of creating a single symlink to the root of the tree, it will create directories in the same structure as the whole of the original tree, and fill them with individual symlinks to the files. This is occasionally handy if you want to work with a slightly modified version of a large file hierarchy but you don't want to waste the disk space needed to create an entirely separate copy: you can symlink-mirror the whole tree, and then just replace one or two of the symlinks with modified versions of the files they point to. -Des: ##---------------------------------------- =Pkg: nagios-plugins-fail2ban 0.8.14 57.1 noarch =Sum: Check fail2ban server and how many IPs are currently banned +Des: This plugin checks if the fail2ban server is running and how many IPs are currently banned. You can use this plugin to monitor all the jails or just a specific jail. How to use ---------- Just have to run the following command: $ ./check_fail2ban --help -Des: ##---------------------------------------- =Pkg: wemux 3.1.0 11.1 noarch =Sum: Multi-User tmux made easy +Des: wemux enhances tmux to make multi-user terminal multiplexing both easier and more powerful. It allows users to host a wemux server and have clients join in various modes: - Mirror Mode gives clients (another SSH user on your machine) read-only access to the session, allowing them to see you work. - Pair Mode allows the client and yourself to work in the same terminal (shared cursor). - Rogue Mode allows the client to pair or work independently in another window (separate cursors) in the same tmux session. It features multi-server support as well as user listing and notifications when users attach/detach. -Des: ##---------------------------------------- =Pkg: libfallocate 0.1.1 40.1 src =Sum: Filesystem preallocation interface library +Des: libfallocate provides an interface for applications to tell filesystems about the size of to-be-written files, so the filesystem can do a better job in taking allocation decisions to avoid fragmentation. libfallocate provides a wrapper for the fallocate() syscall in case your glibc (<2.10) does not have it yet. It also provides linux_fallocate() which will attempt the space reservation ioctl that xfs and ocfs2 provide in case fallocate() did not succeed. It has an additional richer interface fallocate_with_fallback() that allows you to instruct it to fallback to do preallocation by zeroing things out (like posix_fallocate()) or to extend the file size by a sparse write (like a successful fallocate() with mode==0 would have done). -Des: ##---------------------------------------- =Pkg: libssh2 1.4.3 6.1 src =Sum: A library implementing the SSH2 protocol +Des: libssh2 is a library implementing the SSH2 protocol as defined by Internet Drafts: SECSH-TRANS, SECSH-USERAUTH, SECSH-CONNECTION, SECSH-ARCH, SECSH-FILEXFER, SECSH-DHGEX, SECSH-NUMBERS, and SECSH-PUBLICKEY. -Des: ##---------------------------------------- =Pkg: libyaml 0.1.4 2.1 src =Sum: A YAML 1.1 parser and emitter written in C +Des: A YAML 1.1 parser and emitter written in C -Des: ##---------------------------------------- =Pkg: zeromq 3.2.4 20.1 src =Sum: Lightweight messaging kernel +Des: The 0MQ lightweight messaging kernel is a library which extends the standard socket interfaces with features traditionally provided by specialised messaging middleware products. 0MQ sockets provide an abstraction of asynchronous message queues, multiple messaging patterns, message filtering (subscriptions), seamless access to multiple transport protocols and more. -Des: